RFI/EMI Shielding is produced in many different shapes and sizes . The increased demand towards miniaturization means they are getting smaller.
Fotofab's unique photochemical etching process is well suited to make small things.
For a standard formed can (without a trimming operation) we can produce shields with a minimum internal height of .024"(.61mm) and a maximum wall thickness of .008" (0.2mm).
With a secondary trimming operation we are able to produce RF Shields with a minimum internal height of .010" (.254mm) and with a wall thickness of .008"(0.2mm).
Fotofab products are made in the USA and distributed worldwide.
Thinner or thicker materials may be specified for any shielding can, but we recommend that you stay below .010"(.25mm) for small or low profile cans. It helps with bending but thinner material also takes up less space and has less mass.
ITAR, AS9100D, and ISO 9001:2015-Certified Chemical Etching Manufacturer
As an ITAR, AS9100D, and ISO 9001:20015-certified manufacturer and service provider, Fotofab is dedicated to exceeding customer requirements in the production and on-time delivery of high-quality aerospace devices.